6*30引线式防水保险丝座H3-630H

本产品适用于各类电子设备 6*30 过流保险丝,广泛应用于户外、室内路灯邓电路保护保险丝盒子、以及工业应用保险丝丝元件盒子等领域。
This product is suitable for all kinds of over-current 6*30 fuses of electronic equipment circuit, widely used in street lamps, outdoor lamp indoor leakage protection fuse holder, and Industrial applications and other fields.
1、 外壳 holder
改进型 PVC，阻燃度 94 V0，环保，散热，(Advanced PVC, flame retardant 94 V0,environmental protection, heat dissipation.)
2、 金属端子 Terminal H62 黄铜镀镍(H62 brass nickel plating)。
3 、线缆 UL标准线材12~22AWG 两端各外露（可根据客户要求适配）。UL standard wire 12~22AWG is exposed at both ends (can be adapted according to customer requirements)

4、轴向拉力强度 / Lead Pull Strength 200 牛顿 10±1 秒 /200N for 10±1 Seconds

5、使用温度范围 Operating Temperature`: -40 ℃ ～+130 ℃ 。
冷热冲击实验 Cold and Heat Shock Test
-40 ℃温度持续 30Min --- 25 ℃ 持续 5min---- 130 ℃持续 30min -----25 ℃持续 5min 为 1 个循环
-40 ℃ for 30Min --- 25 ℃ for 5min---- 130 ℃ for 30min -----25 ℃ for 5min 1 cyccles
100 各循环后，防水特性测试达到 IP68 防水标准要求。
After 100 cycles, the waterproofing characteristic test meets the IP68 waterproofing standard requirements.
6、防水座子反复拉拔测试 1000 次，始终保持密封强度，防水等级达到 IP68 防水要求
The waterproof seat is repeatedly pulled out and tested 1000 times, and the sealing strength is always maintained. The waterproof grade meets the waterproof requirement of IP68.
7、拔开保险丝座子，将 6*30 的保险丝装入保险丝盒子，上下盖压紧，再装以卡扣，将装有保险丝的保险丝盒两端引线串接在需要保护的电路中。
Unplug the fuse holder, put the 6*30 fuse into the fuse box, press the upper and lower cover tightly, and
then install the buckle. Connect the fuse box with the fuse leads at both ends in series in the circuit that
needs protection.